The CC200 is a 7 t forklift jib crane, also called a forklift fly jib crane, and the longest-reaching crane in our range. It hangs on the fork carriage of a 10–12 t counterbalance forklift, has a 216 kN·m maximum lifting moment and works from 2.8 m out to 12.6 m. The boom has seven sections: a 2.3 m main boom followed by six 1.5 m sections, five of which extend hydraulically and one by hand. The crane runs at a rated working pressure of 20 MPa and weighs 1,850 kg.
CC200 or CC165?
Both cranes carry the same ratings out to 11 m: 7,000 kg at a radius of 2.8 m and 750 kg at a radius of 11 m. The CC200 adds a seventh boom section, which extends the working radius to 12.6 m, where it is rated for 600 kg. Choose the CC200 when you need that extra reach or more hook height, and the CC165 when 11 m is enough for your work.
Which forklift the CC200 fits
A forklift jib crane has no outriggers: the forklift is its counterweight. That is why the CC200 is matched to 10–12 t forklifts, and fitting it to a smaller forklift would tip the forklift forward long before the crane reached its rating. The forklift mast lifts the whole crane, so the maximum hook height is 15,500 mm with a 3 m mast and 17,000 mm with a 4.5 m mast.
How much the CC200 lifts at reach
The 7,000 kg rating applies only close to the mast. Like every moment-rated crane, the CC200 lifts less as the hook moves out: 4,500 kg at 4.9 m, 2,000 kg at 7.9 m and 600 kg at 12.6 m. Tell us your heaviest load and the radius you need, and we will check it against the CC200 load chart before we quote.
Boom folded for driving
For driving, the boom folds in front of the mast. Folded forward, the crane reaches about 2,800 mm in front of the mast; with the boom hanging down, about 1,200 mm. Allow for this in aisles and doorways.
What we need to quote the CC200
- Forklift make, model and rated capacity from the data plate
- Mast height and carriage width, plus a side photo of the forklift
- Whether the forklift has an auxiliary hydraulic circuit
- Your heaviest load, the radius it must reach and the highest point to lift to
Our engineers then confirm the model and the installation on your forklift.
Is 11 m of reach enough? Compare the 7 t CC165 (CC165).
All forklift jib cranes · Forklift jib crane guide · Forklift boom crane load charts compared