Electric Mini Cranes

MIAOXUE Product Range

Electric Mini Cranes

Electric mini cranes with a 12 V electric-hydraulic drive, 360° slewing and manual or wireless remote control, for loading pickups, workshops and docks.

Showing 2 of 2 products

Sort by:

Electric mini cranes for small loads

MIAOXUE electric mini cranes lift 1 or 2 tonnes close to the column without a truck power take-off. A 12 V electric-hydraulic power unit drives the boom luffing, extension and 360° slewing, and the usual battery pack lets the crane work where there is no vehicle power.

Each size comes with manual lever control (EM) or a wireless remote (ER). The crane bolts to a vehicle bed or a fixed base, and a base cart with side outriggers is available. Check the load chart for your working radius: the rated load applies close to the column, and the crane lifts less as the boom reaches out.

For shipping, our factory loading plan puts about 24 one-tonne or 20 two-tonne cranes in a 20 ft standard container without the base cart, and about 6 of either size with the cart. A 40 ft standard container takes about 50 one-tonne or 42 two-tonne cranes without the cart, or 14 and 12 with it. The exact count is confirmed on the packing list for each order.

Electric Mini Cranes BrochurePDF · EN · 8 pages · 1.2 MB

Download PDF

Compare the series

Figures from the MIAOXUE technical drawings. Confirm the final specification with our team before ordering.

Model 1 Ton Electric Mini Crane 1 Ton Electric Mini Crane SQ1Z-E 2 Ton Electric Mini Crane 2 Ton Electric Mini Crane SQ2Z-E
Capacity 1 t 2 t
Max lifting moment 1.2 t·m 2.4 t·m
Max working radius 2.8 m 3.1 m
Max lifting height 3.1 m 3.4 m
Rotation angle 360° 360°
Power 1,200 W 2,200 W
Self weight 235 kg 290 kg
Built to order View SQ1Z-E View SQ2Z-E

From steel
to shipment.

Photographed at our factory in Xuzhou, Jiangsu: the steps a crane goes through before it leaves.

Parts and hydraulics
01 / 10 Parts and hydraulics Boom sections, cylinders, frames and hydraulic parts are staged next to the assembly line.
Parts and welds
02 / 10 Parts and welds Boom sections, cylinders and hydraulic parts are checked in the workshop before and during assembly.
Assembly halls
03 / 10 Assembly halls Knuckle and telescopic booms are assembled in long rows under overhead cranes.
Load and function test
04 / 10 Load and function test The finished crane is mounted on the test bay and runs through lifting, slewing and outrigger functions under load.
Lift the crane onto the chassis
05 / 10 Lift the crane onto the chassis An overhead hoist holds the crane while it is placed on the truck frame in the workshop.
Fix the crane to the frame
06 / 10 Fix the crane to the frame Technicians work under the cab to secure the crane base to the chassis.
Check the finished truck
07 / 10 Check the finished truck The crane stands complete on the truck with its boom raised for inspection.
Line up the order
08 / 10 Line up the order Every crane in an order is tested, set on its base or a pallet and lined up in the hall before packing.
Wrap the crane
09 / 10 Wrap the crane Cranes are wrapped in stretch film before they leave the workshop.
Load the container
10 / 10 Load the container A hoist or a forklift moves each packed crane into the container.

Mini loaders and dumpers

Mini skid steer loaders, mini dumpers and attachments, on the MIAOXUE loader site.

Visit miaoxue.xyz