The SQ5SA2F is a 5.15 ton telescopic boom crane for tow and recovery trucks. It lifts 5,150 kg at 2.35 m, 2,650 kg at 4.25 m and 1,850 kg at its full 6.2 m reach, with a 14.5 t·m maximum lifting moment and 400° slewing.
What the SQ5SA2F is built for
Recovery work means lifting a damaged car, a motorcycle or parts onto the bed, or clearing a vehicle from a ditch or a tight roadside spot. The SQ5SA2F has a main boom and one hydraulic extension (the A2 in the model name) and raises to 70°, so the hook reaches about 8.5 m. The load chart also draws the boom angled below horizontal, down past the level of the outrigger feet.
The F stands for flip-over outriggers: they swing up beside the crane for travel and down to the ground for lifting. Set, they span from 2,260 mm to 5,120 mm. Stowed, the crane is 2,420 mm wide and 2,452 mm high and needs 850 mm of chassis length behind the cab.
Load at each radius
Figures from the SQ5SA2F load chart on this page, with the boom horizontal and the outriggers set. Never lift more than the chart shows at your working radius.
Mounting it on your truck
These are the figures from the SQ5SA2F dimension drawing and specification that you or your body builder need:
Send us the truck make, model and wheelbase, and we check that the chassis and power take-off suit the crane before you order.
Warranty and service
MIAOXUE covers the whole crane for 12 months. Common spare parts leave the factory within 48 hours, and our service team answers within 12 hours and can guide repairs by video. Cranes ship from Lianyungang, Qingdao or Shanghai.
All other cranes