The F100Z-2E is a 2.45 ton knuckle boom crane for refuse and recycling trucks. It lifts 2,450 kg at 3 m, 1,470 kg at 5 m and 1,050 kg at its full 7 m reach, with a 10 t·m maximum lifting moment and continuous 360° slewing.
What the F100Z-2E is built for
Refuse work means many short lifts at the side or rear of the truck: bulky waste, street bins, skips, bags of recyclables and scrap. The F100Z-2E stows upright beside the body at 1,930 mm high and 1,241 mm from the slewing centre, so it leaves the load area free. Its base is 750 mm wide and the crane needs 800 mm of installation space on the chassis.
The boom has two hydraulic extensions of 1,600 mm each, the “2E” in the model name. Fully extended the crane measures 7,497 mm, and it raises to 80°, so the tip reaches about 8 m. Because it slews continuously through 360°, the operator can pick from either side of the truck and swing straight over the body without reversing.
Load at each radius
Figures from the F100Z-2E load chart on this page, with the boom horizontal. Count the weight of any grab or other attachment as part of the load, and never lift more than the chart shows at your working radius.
Mounting it on your truck
These are the figures from the F100Z-2E dimension drawing and specification that you or your body builder need:
Send us the truck make, model, wheelbase and body type, and we check that the chassis and power take-off suit the crane before you order.
Warranty and service
MIAOXUE covers the whole crane for 12 months. Common spare parts leave the factory within 48 hours, and our service team answers within 12 hours and can guide repairs by video. Cranes ship from Lianyungang, Qingdao or Shanghai.
All other cranes