The SQ4ZG3T is a knuckle boom spider crane on crawler tracks. It lifts 1,600 kg at 3 m and 580 kg at its full 5.6 m reach, slews 360° and weighs 2,460 kg. Four fold-out outrigger legs set it on a 3,686 × 3,423 mm footprint.
What the SQ4ZG3T is built for
It drives itself to the job on its own tracks and gets where truck-mounted units cannot: inside buildings, through gates, onto courtyards and up to a façade. The SQ4ZG3T is 1,400 mm wide over the tracks. Typical jobs are setting glass panels and curtain-wall units, placing machinery inside workshops, and lifting beams, pipes and HVAC units on sites with no truck access.
The knuckle boom folds at its second joint, so the hook can work close in under a ceiling or reach up and over an obstacle. The load chart marks two raised positions, 65° and 56°. If you need longer reach with a straight boom, compare it with the BLS3.0T telescopic spider crane, which works out to 8.46 m.
Load at each radius
Figures from the SQ4ZG3T load chart on this page, with the boom horizontal and the outriggers set. Never lift more than the chart shows at your radius.
Size and transport
Track width and outrigger footprint from the SQ4ZG3T drawing; length and height from the MIAOXUE brochure:
Measure the narrowest gate on your route and the area where the legs will stand, and check that slabs and ramps carry 2,460 kg; our engineers confirm the fit from those numbers.
Warranty and service
MIAOXUE covers the whole crane for 12 months. Common spare parts leave the factory within 48 hours, and our service team answers within 12 hours and can guide repairs by video. Cranes ship from Lianyungang, Qingdao or Shanghai.
All spider cranes
Certification
The SQ4ZG3 series holds a CE certificate of conformity under the EU Machinery Directive 2006/42/EC.